Kogel PF30-ROAD

Please ensure that you get the right bottom bracket for your frame and get it installed by a professional mechanic. All sales are final and are non-exchangeable/ refundable. Any units that are found to be faulty due to improper installation will not be warrantied.

PF30

• Any BB30 cranks
• Fits any BB30 crank on a PF30 frame.
• This narrow set up is very hard on bearings, we recommend to use the cross bearings on road bikes if you value a set-and-forget over shaving the last few milliwatts.
• Fits a BBRight crank on a BBRight frame Rotor and FSA build BBRight specific cranks that are sold on their complete bikes.
• Fits a 386EVO, Rotor 30mm, Campagnolo Over Torque crank on a 386EVO frame.
• Fits most 30mm crank spindles on a 386EVO frame.

PF30-24

• Shimano / Rotor cranks
• This bottom bracket fits any Shimano / Rotor 24mm crank on a PF30 frame.

PF30-GXP

• SRAM GXP cranks 
• This bottom bracket fits any Sram GXP crank on a PF30 frame.

PF30-DUB

• SRAM DUB cranks
• This bottom bracket fits a SRAM DUB crank set on a PF30 frame. It moves the bearings out of the frame in order to make a wider and stiffer set up. Bearing wear is greatly reduced with this wider set up compared to a standard PF30 setup with spacers.

PF30-386

• Long spindle 30mm cranks
• This bottom bracket will fit most 30mm crank spindles on a PF30 frame. It moves the bearings out of the frame in order to make a wider and stiffer set up. Bearing wear is greatly reduced with this wider set up compared to a standard PF30 setup with spacers. Fits Rotor 30mm, RaceFace Cinch, Easton, 386EVO, BB30. Campagnolo Over Torque.
•  Cranks that will not fit with this bottom bracket: traditional (pre 2014) BB30 cranks with short spindles and Specialized FACT. For these cranks, please have a look at our PF30 bottom bracket

PF30A-24

• Shimano / Rotor 24mm / SRAM GXP cranks
• This asymmetric bottom bracket is found on 2022 and older Cannondale carbon frames. It fits any Shimano / Rotor 24mm / Sram GXP crank on a PF30A frame. PF30A is an asymmetric bottom bracket found on Cannondale carbon frames: SuperSix Evo, SystemSix and Slice.
• To install a Cannondale crank on any of these bikes, choose a standard PF30 bottom bracket