magura10

ANNOUNCEMENT: We are now the sole distributor of MAGURA for Singapore and Malaysia!

MAGURA - Quality Made In Germany!

MAGURA's customers are among the most demanding on earth. They demand innovation, quality, performance, value and rock-solid backup. Satisfying and exceeding their expectations is what drives MAGURA on, year on year.

MAGURA's products begin life with a good helping of inspiration, backed up by German thoroughness and an eye for detail. They carefully plan their products using theoretical calculations and Finite Element Analysis to determine the safest, strongest but lightest way of making their brakes and forks. They in-house test facilities then stress, strain and pound these designs to ensure they meet the highest standards while they inspect them, refining and improving them as they go. More testing is done using on-board data-logging in the lap and in the real world as they set up and tune these chassis.

Finally, the prototypes are given a thorough and merciless testing by our external test riders. Only when everyone is satisfied; from our engineers to our test riders, do they put these new products into production. Production that is done, by hand, in Germany. You don't think that they would trust anyone else to make our products after all that effort, do you? At a time when their rivals are outsourcing their manufacturing to the Far East, MAGURA feels that their insistence on making their products in-house counts for a lot. We hope you do too!

WHY CHOOSE MAGURA BRAKES AND SUSPENSION

Know-How
MAGURA has been a pioneer of hydraulic brakes for bikes producing the first widely accepted stoppers as early as 1987. The knowledge gained from over 60 years of experience developing brakes for BMW motorcycles made the technology transfer possible.

There are good suspension forks and good disc brakes out there. However, the interaction between the two can often be a let down. Not so with MAGURA forks, that are built with the main specification that they are to be used with powerful disc brakes. All MAGURA forks are approved for disc brakes up to 210mm rotor diameter!

Reliability
The reliability of MAGURA products is legendary. Their components have been celebrated by the bike press for years. German consumers are very demanding (have a look on their cars…!) and bike components are no exception to that rule. Since 1998 every year 20.000 readers of German Bike Magazine,“Mountain Bike”, have voted for MAGURA, ten times in a row, as the “Best Brand”, in the category brakes.

Low maintenance/environmentally friendly
MAGURA brakes work with mineral oil, are therefore uncomplicated to work with, (no poisonous/carcinogenic brake fluid) giving years of trouble free service. In a nutshell: mineral is nicer stuff to deal with – safe our planet!

Guarantee*
MAGURA gives a unique 5-year leakproof guarantee for the lever assembly and caliper of all brakes, if you register the brakes you’ve bought here on www.magura.com.

MAGURA Passion Point Dealers
What’s the point of having the best parts on your bike, if they are not set up properly or dialed into your riding style and weight? It’s for this reason that, in the last few years, MAGURA has built up a qualified dealer-network of specialists to give you the best service possible.

Complete stock of all MAGURA products
Spare parts supply within 48 hours
Great service and technical know-how that guarantees a long-term enjoyment of your MAGURA product
Passion Point dealer listing here on www.magura.com

Top notch after sales service
MAGURA offer both dealers and end-users, years of experience and hot lines that are among the most competent of the biz out there. Get free online support around the clock in their forum or give a call to their service partners in each country.

MAGURA – where technology meets character.

DURIN 100 SL

New for 2010 - New disc brake hose guide ensuring bombproof fitting. New damper oil for better performance at low prices.

Super lightweight race air spring fork featuring the awesome and absolutely unique Double Arch Design leading SABINE SPITZ to her gold medal at the 2008 Olympic Games in Beijing. Maximum stiffness, 9mm dropouts and PM 6" disc mounts; i.e. direct mount of the caliper without adaptor to run with a 160mm/6" rotor. Cool 'red sock' design.

Technical features | Fix compression damping (Albert SL) cartridge with optimum, self adjusting race setup. No lockout, no remote to save weight. Superstiff 32 mm upper legs. Cold forged Aluminium 6082 T6 fork crown. 9mm safety dropouts (SDO) with perfect hub engagement. All adjuster knobs made of high quality aluminium.

Adjustment possibilities | Rebound, preload (air pressure).

Travel, weight | 100 mm, 1,370 grams.

Disc mounts | PM 6".

Versions, colour | Disc only.

Note | Approved for disc brakes up to 210 mm/8,5". Delivered with air pump.

DURIN 100 RACE.
New for 2010 - Now with DLO⁺: with improved shim setup for an even more responsive fork. Featuring a real blow-off which allows the fork to be reactive to big impacts even with the fork being locked out. New adjuster knobs with improved ergonomics. New improved cable fixing for remote version. Cable end disappears within the adjuster knob for a clean and elegant look. New disc brake hose guide ensuring bombproof fitting. New damper oil for better performance at low temperatures.

World Championships, European Championships, endless national titles. Not only that the lightweight race weapon convinced the pro racers because of its performance and ultimate stiffness, it also turned out to be a real head-turner with its cool ’red sock’ design. There’s no doubt about it: with a Durin on board you’ll be perfectly equipped when it comes to serious XC racing.

Technical features | Unique Dynamic Lockout system (DLO⁺) offering better ground control than conventional lockout systems, including RCL Remote Control. Superstiff 32 mm upper legs. Cold forged Aluminium 6082 T6 fork crown with integrated cable stop. 9mm dropout safety dropouts (SDO) for perfect hub engagement. All adjuster knobs made of high quality aluminium.

Adjustment possibilities | Dynamic Lockout (DLO⁺). rebound, preload (air pressure).

Travel, weight | 100 mm, 1,430 grams.

Disc mounts | PM 6".

Versions, colour | Disc only,

Note | Approved for disc brake use up to 210 mm/8.5". Delivered with air pump.

MENJA 100

Air spring fork featuring the unique Double Arch Design (DAD) offering maximum stiffness. 9mm safety dropouts and International Standard 6" disc mounts. Cool “red sock” design.

Technical features | Unique Dynamic Lockout System (DLO⁺) featuring better ground control than conventional lockout systems, remote control available as option. Superstiff 32 mm upper legs. Cold forged Aluminium 6082 T6 fork crown with integrated cable-stops for the remote control. Safety dropouts (SDO) with perfect hub engagement. Corrosion Protectors at both disc mounts and dropouts. All adjuster knobs made of high quality aluminium.

Adjustment possibilities | Dynamic Lockout (DLO⁺. rebound, preload (air pressure).

Travel, weight | 100 mm, 1,695 grams.

Versions, colour | FIRM-tech/Disc (100, 85 mm), Canti/Disc (85 mm).

Note | Approved for disc brake use up to 210mm/8.5". Delivered with air pump.

THOR 140

New 2010: Albert Select+: with improved shim setup for an even more responsive fork. New adjuster knobs with improved ergonomics. New improved cable fixing for remote version. Cable end disappears within the adjuster knob for a clean and elegant look. New disc brake hose guide ensuring bombproof fitting. Fork crown now in white finish – pure elegance combined with optical lightweight. New damper oil for better performance at low temperatures.

Lightweight and uncompromising All Mountain fork with adjustable travel from 140mm to 100mm with RCL remote control and 20mm Maxle 360^o q/r axle. Cool "red sock" design. Postmount 7" Disc Mounts, i.e. direct mount of the caliper without adaptor in combination with a 180mm/7" rotor.

Technical Features | Unique Albert Select featuring optimized damping through the complete speed range. Superstiff 32 mm upper legs. Cold forged Aluminium 6082 T6 fork crown with integrated cable-stops for the RCL remote control. Maxle 360™ thru-axle system with QR. All adjuster knobs is made of high quality aluminium.

Adjustment Possibilities | Comfortable Flight Control Remote System (FCR), that allows adjustable on-the-fly adjustment of the travel from 140 mm to 100 mm. Adjustable platform compression damping (Albert Select+), rebound, preload (air pressure).

Travel, weight | 140–100 mm, 1,785grams (without Maxle 360™ axle and FCR remote lever).

Dropout | 20mm

Disc mounts | PM 7".

Versions, colour | Disc only.

Note | Delivered with air pump. Approved for disc brakes up to 210 mm/8,5".

The name speaks volumes. By using high-strength, forged magnesium for the brake lever (master) the top model of the Marta line features a weight of just 315 grams! The new Marta generation, launched in 2009, is also uncompromisingly recommendable for Enduro and Freeride use, slotted SL rotor or Ventidisc (180 or 203 mm) provided! Technical features \| Open hydraulic disc brake system with completely integrated reservoir. EBT technology for superfast and convenient bleeding. Dual piston fixed caliper made of forged, high strength magnesium with automatic pad wear adjustment in a smart One Piece Design for maximum stiffness. Pad wear thickness can be checked without removal of the pads. Awesome looking SL rotor in diameters of 203, 180 or 160 mm (8", 7" or 6") for improved cooling. Feather-light carbon 2-finger blade with integrated reach adjust. All fitting bolts made of titanium. Weight \| From 315 grams onwards (depending on model). Colours \| Brake lever and caliper in race-white with black and red labels. Gear Shifter compatibility \| Compatible with all Shimano STI, SRAM trigger and SRAM and Rohloff twist grip shifters. Not compatible with Shimano Dual Control. Dual Docking. Trigger shifters can be mounted both inside and outside the brake lever. Note \| Also compatible with Venti-Disc, drilled SL rotor and 90° hose fitting for caliper. Guarantee \| 5-year leakproof warranty after online registration on magura.com
When it comes to superlight disc brakes there has been one benchmark over the past seven years: MAGURA Marta SL! Minimum weight, combined with unmatched power, modulation and performance. The new Marta generation, launched in 2009, is also uncompromisingly recommendable for Enduro and Freeride use, slotted SL rotor or Ventidisc (180 or 203 mm) provided! Technical features \| Open hydraulic disc brake system with completely integrated reservoir. EBT technology for superfast and convenient bleeding. Dual piston fixed caliper with automatic pad wear adjustment in a smart One Piece Design for maximum stiffness. Pad wear thickness can be checked without removal of the pads. Awesome looking SL rotor for improved cooling in diameters of 203, 180 or 160 mm (8", 7" or 6"). Feather-light carbon 2-finger blade with integrated reach adjust. Weight \| From 335 grams onwards (depending on model). Colours \| Silver or red anodized. Gear Shifter compatibility \| Compatible with all Shimano STI, SRAM trigger and SRAM and Rohloff twist grip shifters. Not compatible with Shimano Dual Control. Dual Docking. Trigger shifters can be mounted both inside and outside the brake lever. Note \| Also compatible with Venti-disc, drilled SL rotor and 90° hose fitting for caliper. Available in several versions (cf. table). Guarantee \| 5-year leakproof warranty after online registration on magura.com
The new Louise is a versatile full hydraulic disc brake in a unique and outstanding design. New 2009 \| Larger lever blade with improved ergonomics for a better grip. Technical features \| Open hydraulic disc brake system with integrated reservoir. Dual piston fixed caliper with automatic pad wear adjustment. Heat Eater: Tool less adjustable hose fitting (45°) with integrated cooler. Pad wear thickness can be checked without removal of the pads. Quickfit brake lever (master) for superfast installation and removal, forged 2-finger aluminium lever blade with reach adjust and integrated Bite Adjust Technology (BAT) for pressure point modulation. Venti disc rotor with 15 % improved ventilation in three diameters. Weight \| From 454g/0.98 lbs (Venti disc) resp. 410g/0.90 lbs. (SL rotor) Colours \| Brake lever and caliper silver. Gear Shifter compatibility \| Compatible with all Shimano STI, SRAM trigger and SRAM and Rohloff twist grip shifters. Not compatible with Shimano Dual Control. Dual Docking. Trigger shifters can be mounted both inside and outside the brake lever. Note \| Also available with lighter drilled SL rotor for weight weenies. Venti disc also available in Centerlock version. Guarantee \| 5-year leakproof warranty after online registration on magura.com
The Julie hp, launched in 2009, is the disc stopper for the budget orientated biker. With the same features like its more expensive sister models, such as EBT, high pressure system or the adjustable Heat Eater hose fitting at the caliper, the Julie hp is about to become a contender. Technical features \| Open hydraulic disc brake system with integrated reservoir. Dual piston fixed caliper with automatic pad wear adjustment. Pad wear thickness can be checked without removal of the pads. Quickfit brake lever (master) for superfast installation and removal, lightweight 2-finger aluminium lever blade with reach adjust and integrated Bite Adjust Technology (BAT) for pressure point modulation. New: Adjustable Heat Eater hose fitting at the caliper. Drilled SL rotor in diameters of 203, 180 or 160 mm (8", 7" or 6"),Ventidisc as option. New: Easy Bleed Technology (EBT) – for superfast and convenient bleeding. Weight \| From 420 grams onwards (depending on model). Colours \| Black. Gear Shifter compatibility \| Compatible with all Shimano STI, SRAM trigger and Sram and Rohloff twist grip shifters. Not compatible with Shimano Dual-Control. Dual Docking. Trigger shifters can be mounted both inside and outside the brake lever. Note \| Also compatible with Venti disc. Guarantee \| 5-year leakproof warranty after online registration on magura.com

To benefit from the extended 5-year leakproof warranty you are kindly required to fill in the online questionnaire (www.magura.com/en/service/5-year-leakproof-warranty.html). You will get after your registration a confirmation to your e-mail address.

Provided that you have filled in your online registration properly, MAGURA warrants in addition to the respective warranty legislation of each country all mentioned units for five years.

The name speaks volumes. By using high-strength, forged magnesium for the brake lever (master) the top model of the Marta line features a weight of just 315 grams! The new Marta generation, launched in 2009, is also uncompromisingly recommendable for Enduro and Freeride use, slotted SL rotor or Ventidisc (180 or 203 mm) provided! Technical features \| Open hydraulic disc brake system with completely integrated reservoir. EBT technology for superfast and convenient bleeding. Dual piston fixed caliper made of forged, high strength magnesium with automatic pad wear adjustment in a smart One Piece Design for maximum stiffness. Pad wear thickness can be checked without removal of the pads. Awesome looking SL rotor in diameters of 203, 180 or 160 mm (8", 7" or 6") for improved cooling. Feather-light carbon 2-finger blade with integrated reach adjust. All fitting bolts made of titanium. Weight \| From 315 grams onwards (depending on model). Colours \| Brake lever and caliper in race-white with black and red labels. Gear Shifter compatibility \| Compatible with all Shimano STI, SRAM trigger and SRAM and Rohloff twist grip shifters. Not compatible with Shimano Dual Control. Dual Docking. Trigger shifters can be mounted both inside and outside the brake lever. Note \| Also compatible with Venti-Disc, drilled SL rotor and 90° hose fitting for caliper. Guarantee \| 5-year leakproof warranty after online registration on magura.com
When it comes to superlight disc brakes there has been one benchmark over the past seven years: MAGURA Marta SL! Minimum weight, combined with unmatched power, modulation and performance. The new Marta generation, launched in 2009, is also uncompromisingly recommendable for Enduro and Freeride use, slotted SL rotor or Ventidisc (180 or 203 mm) provided! Technical features \| Open hydraulic disc brake system with completely integrated reservoir. EBT technology for superfast and convenient bleeding. Dual piston fixed caliper with automatic pad wear adjustment in a smart One Piece Design for maximum stiffness. Pad wear thickness can be checked without removal of the pads. Awesome looking SL rotor for improved cooling in diameters of 203, 180 or 160 mm (8", 7" or 6"). Feather-light carbon 2-finger blade with integrated reach adjust. Weight \| From 335 grams onwards (depending on model). Colours \| Silver or red anodized. Gear Shifter compatibility \| Compatible with all Shimano STI, SRAM trigger and SRAM and Rohloff twist grip shifters. Not compatible with Shimano Dual Control. Dual Docking. Trigger shifters can be mounted both inside and outside the brake lever. Note \| Also compatible with Venti-disc, drilled SL rotor and 90° hose fitting for caliper. Available in several versions (cf. table). Guarantee \| 5-year leakproof warranty after online registration on magura.com
The new Louise is a versatile full hydraulic disc brake in a unique and outstanding design. New 2009 \| Larger lever blade with improved ergonomics for a better grip. Technical features \| Open hydraulic disc brake system with integrated reservoir. Dual piston fixed caliper with automatic pad wear adjustment. Heat Eater: Tool less adjustable hose fitting (45°) with integrated cooler. Pad wear thickness can be checked without removal of the pads. Quickfit brake lever (master) for superfast installation and removal, forged 2-finger aluminium lever blade with reach adjust and integrated Bite Adjust Technology (BAT) for pressure point modulation. Venti disc rotor with 15 % improved ventilation in three diameters. Weight \| From 454g/0.98 lbs (Venti disc) resp. 410g/0.90 lbs. (SL rotor) Colours \| Brake lever and caliper silver. Gear Shifter compatibility \| Compatible with all Shimano STI, SRAM trigger and SRAM and Rohloff twist grip shifters. Not compatible with Shimano Dual Control. Dual Docking. Trigger shifters can be mounted both inside and outside the brake lever. Note \| Also available with lighter drilled SL rotor for weight weenies. Venti disc also available in Centerlock version. Guarantee \| 5-year leakproof warranty after online registration on magura.com
The Julie hp, launched in 2009, is the disc stopper for the budget orientated biker. With the same features like its more expensive sister models, such as EBT, high pressure system or the adjustable Heat Eater hose fitting at the caliper, the Julie hp is about to become a contender. Technical features \| Open hydraulic disc brake system with integrated reservoir. Dual piston fixed caliper with automatic pad wear adjustment. Pad wear thickness can be checked without removal of the pads. Quickfit brake lever (master) for superfast installation and removal, lightweight 2-finger aluminium lever blade with reach adjust and integrated Bite Adjust Technology (BAT) for pressure point modulation. New: Adjustable Heat Eater hose fitting at the caliper. Drilled SL rotor in diameters of 203, 180 or 160 mm (8", 7" or 6"),Ventidisc as option. New: Easy Bleed Technology (EBT) – for superfast and convenient bleeding. Weight \| From 420 grams onwards (depending on model). Colours \| Black. Gear Shifter compatibility \| Compatible with all Shimano STI, SRAM trigger and Sram and Rohloff twist grip shifters. Not compatible with Shimano Dual-Control. Dual Docking. Trigger shifters can be mounted both inside and outside the brake lever. Note \| Also compatible with Venti disc. Guarantee \| 5-year leakproof warranty after online registration on magura.com

WARRANTY